Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3691

polling-interval
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
polling-interval seconds;
[edit protocols sflow],
[edit protocols sflow interfaces interface-name]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure the interval (in seconds) that the switch waits between port statistics update
messages. "Polling" refers to the switch's gathering various statistics for the network
interfaces configured for sFlow monitoring and exporting the statistics to the configured
sFlow collector.
If no polling interval is configured for a particular interface, the switch waits the number
of seconds that is configured for the global sFlow configuration. If no global interval is
configured, the switch waits 20 seconds between messages.
—Number of seconds between port statistics update messages. A
seconds
specifies that polling is disabled.
Range: 0–3600 seconds
Default: 20 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 56
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3584
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3579
Chapter 128: sFlow Monitoring Technology
(zero) value
0
3595