Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3611

show rsvp session
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show rsvp session
<brief | detail | extensive | terse>
<bidirectional | unidirectional>
<bypass>
<down | up>
<interface interface-name>
<logical-system (all | logical-system-name)>
<lsp-type>
<name session-name>
<p2mp>
<session-type>
<statistics>
<te-link te-link>
show rsvp session
<brief | detail | extensive | terse>
<bidirectional | unidirectional>
<bypass>
<down | up>
<interface interface-name>
<lsp-type>
<name session-name>
<p2mp>
<session-type>
<statistics>
<te-link te-link>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display information about Resource Reservation Protocol (RSVP) sessions.
none —Display standard information about all RSVP sessions.
brief | detail | extensive | terse
bidirectional | unidirectional
unidirectional RSVP sessions only, respectively.
—(Optional) Display RSVP sessions for bypass LSPs.
bypass
down | up —(Optional) Display only LSPs that are inactive or active, respectively.
—(Optional) Display RSVP sessions for the specified interface
interface interface-name
only.
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Display information about RSVP sessions with regard to LSPs:
lsp-type
—Sessions used for bypass LSPs.
bypass
Chapter 126: Operational Mode Commands for MPLS
—(Optional) Display the specified level of output.
—(Optional) Display information about bidirectional or
—(Optional) Perform this operation on all logical
3515