Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3896

Complete Software Guide for Junos
Table 501: show oam ethernet connectivity-fault-management interfaces Output
Fields (continued)
Field Name Field Description
Maintenance domain name.
Maintenance
domain name
Maintenance domain name format configured.
Format
(Maintenance
domain)
Level Maintenance domain level configured.
Maintenance Maintenance association name.
association name
Format Maintenance association name format configured.
(Maintenance
association)
Continuity-check status.
Continuity-check
status
Continuity-check message interval.
Interval
Lost continuity-check message threshold.
Loss-threshold
Maintenance association end point (MEP) identifier.
MEP identifier
Number of MEP neighbors.
Neighbours
Direction MEP direction configured.
MAC address MAC address configured for the MEP.
MEP status Indicates the status of the Connectivity Fault Management (CFM) protocol
running on the MEP:
Remote MEP not Whether the remote MEP is not receiving connectivity check messages (CCMs).
receiving CCM
Erroneous CCM Whether erroneous CCMs have been received.
received
Cross-connect Whether cross-connect CCMs have been received.
CCM received
RDI sent by some Whether the remote defect indication (RDI) bit is set in messages that have
been received. The absence of the RDI bit in a CCM indicates that the
MEP
transmitting MEP is receiving CCMs from all configured MEPs.
Number of CCMs transmitted.
CCMs sent
3800
®
OS for EX Series Ethernet Switches, Release 10.3
Running , inactive , disabled , or unsupported .
Copyright © 2010, Juniper Networks, Inc.
Level of Output
detail extensive
detail extensive
All levels
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
All levels
All levels
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive