Show Mpls Interface; Table 468: Show Mpls Interface Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show mpls interface

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show mpls interface show mpls interface
3482
®
OS for EX Series Ethernet Switches, Release 10.3
show mpls interface
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display information about MPLS-enabled interfaces. MPLS is enabled on an interface
when the interface is configured with both the
and
set interfaces interface-name unit 0 family mpls
view
Example: Configuring MPLS on EX Series Switches on page 3365
Configuring MPLS on Provider Edge Switches (CLI Procedure)
Configuring MPLS on Provider Switches (CLI Procedure) on page 3396
show mpls interface on page 3482
Table 468 on page 3482 describes the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 468: show mpls interface Output Fields

Field Name
Interface
State
Administrative groups
user@switch> show mpls interface
Interface State
so-1/0/0.0 Up
set protocols mpls interface interface-name
commands.
Field Description
Name of the interface.
State of the interface: or
Up Dn
Administratively assigned colors of the link.
Administrative groups
Blue Yellow Red
show mpls interface command.
(down).
Copyright © 2010, Juniper Networks, Inc.