Link-Adjacency-Loss; Link-Discovery - Juniper JUNOS OS 10.3 - SOFTWARE Manual

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

Complete Software Guide for Junos

link-adjacency-loss

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

link-discovery

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3748
®
OS for EX Series Ethernet Switches, Release 10.3
link-adjacency-loss;
[edit protocols oam ethernet link-fault-management action-profile event]
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Configure
loss of adjacency
peer. When included, the loss of adjacency event triggers the action specified under the
action statement.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Ethernet OAM Link Fault Management on EX Series Switches
on page 3727
Configuring Ethernet OAM Link Fault Management (CLI Procedure) on page 3729
link-discovery (active | passive);
[edit protocols oam ethernet link-fault-management interface interface-name]
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Specify the discovery mode used for IEEE 802.3ah Operation, Administration, and
Maintenance (OAM) link fault management (LFM) support. The discovery process is
triggered automatically when OAM 802.3ah functionality is enabled on an interface. Link
monitoring is done when the interface sends periodic OAM PDUs.
active—In active mode, the interface discovers and monitors the peer on the link if the
peer also supports IEEE 802.3ah OAM functionality.
passive—In passive mode, the peer initiates the discovery process.
Once the discovery process is initiated, both sides participate in discovery.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Ethernet OAM Link Fault Management (CLI Procedure) on page 3729
event with the IEEE 802.3ah link fault management (LFM)
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents