Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3939

Required Privilege
Level
List of Sample Output
Copyright © 2010, Juniper Networks, Inc.
Chapter 135: Operational Mode Commands for General Network Management and Monitoring
—(Optional) How often to send ping requests. The range of values, in
interval seconds
seconds, is through infinity. The default value is
1
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Intermediate loose source route entry (IPv4). Open a set
loose-source value
of values.
—(Optional) Do not attempt to determine the hostname that corresponds to
no-resolve
the IP address.
pattern string —(Optional) Specify a hexadecimal fill pattern to include in the ping packet.
—(Optional) Send ping requests rapidly. The results are reported in a single message,
rapid
not in individual messages for each ping request. By default, five ping requests are
sent before the results are reported. To change the number of requests, include the
count option.
record-route —(Optional) Record and report the packet's path (IPv4).
routing-instance routing-instance-name
ping attempt.
size bytes —(Optional) Size of ping request packets. The range of values, in bytes, is
through . The default value is
65,468
bytes of ICMP header data are added to the packet.
source source-address —(Optional) IP address of the outgoing interface. This address is
sent in the IP source address field of the ping request. If this option is not specified,
the default address is usually the loopback interface (
strict —(Optional) Use the strict source route option (IPv4).
—(Optional) Intermediate strict source route entry (IPv4). Open a set
strict-source value
of values.
tos type-of-service —(Optional) Set the type-of-service (ToS) field in the IP header of the
ping packets. The range of values is
ttl value —(Optional) Time-to-live (TTL) value to include in the ping request (IPv6). The
range of values is through
0
—(Optional) Display detailed output.
verbose
—(Optional) Delay, in seconds, after sending the last packet. If this option
wait seconds
is not specified, the default delay is
count option, a default count of
network
ping hostname on page 3844
.
1
—(Optional) Perform this operation on all logical
—(Optional) Name of the routing instance for the
, which is effectively 64 bytes because 8
56
lo.0
through .
0 255
.
255
seconds. If this option is used without the
10
5 packets is used.
0
).
3843