Configuring Service Interface Pools (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV Manual

Table 124: Probe Server Configuration Details (continued)
Option
Probe Server > Udp
Comment
Port
Destination Interface

Configuring Service Interface Pools (NSM Procedure)

Table 125: Service Interface Pools Configuration Details
Option
Name
Comment
pool > Interface
Name
Comment
Copyright © 2010, Juniper Networks, Inc.
Chapter 13: Configuring Services for J Series Services Routers and SRX Series Services Gateways
Function
Specifies the comment for UDP.
Specifies the UDP port number.
Specifies the name of the output interface for
probes.
To configure service interface pool options:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the service interface pool options.
Click the Configuration tab. In the configuration tree, expand Services > Service
3.
Interface Pools.
In the Service Interface Pools workspace, enter a comment for the service interface
4.
pool.
In the configuration tree, select Services > Service Interface Pools > Pool.
5.
Add or modify settings as specified in Table 125 on page 185.
6.
Click one:
7.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the service interface pool options.
Function
Specifies the service interface pool name.
Specifies the comment for the service interface pool.
Specifies the services interface name.
Specifies the comment for the services interface.
Your Action
Enter a comment.
Set the port number. Range: 0 through 65535.
Enter the name of the destination interface.
Your Action
Enter a name.
Enter a comment.
Enter a name.
Enter a comment.
185