Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1831

Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
NOTE: When you specify the same AS number in more than one routing
instance on the local routing device, you must configure the same number
of loops for the AS number in each instance. For example, if you configure a
value of 3 for the
same AS number as that of the master instance, you must also configure a
value of 3 loops for the AS number in the master instance.
Use the independent-domain
only on a subset of routing instances.
The remaining statement is explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
independent-domain
Configuring AS Numbers for BGP
4-Byte Autonomous System Numbers Overview
Juniper Networks Implementation of 4-Byte Autonomous System Numbers
Configuring 4-Byte Autonomous System Numbers
Chapter 73: Configuration Statements for Layer 3 Protocols
statement in a VRF routing instance that uses the
loops
option if the loops statement must be enabled
1735