Cluster - Juniper JUNOS OS 10.3 - SOFTWARE Manual

cluster

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
cluster cluster-identifier;
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit routing-instances routing-instance-name protocols bgp],
[edit routing-instances routing-instance-name protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name
neighbor address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify the cluster identifier to be used by the route reflector cluster in an internal BGP
group.
—IPv6 or IPv4 address to use as the cluster identifier.
cluster-identifier
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
no-client-reflect on page 1884
Configuring BGP Route Reflection
Chapter 73: Configuration Statements for Layer 3 Protocols
1763