Portal Configuration Examples (On Routers); Portal Direct Authentication Configuration Examples - 3Com MSR 50 Series Configuration Manual

3com msr 30-16: software guide

Hide thumbs Also See for MSR 50 Series:

Safety information manual (12 pages)

Table of Contents

Portal Configuration

Examples (on Routers)

Portal Direct

Authentication

Configuration Examples

Clear the portal server statistics on

the specified interface or all

Clear TCP spoofing statistics

Network requirements

The router is configured with direct portal authentication. Before portal

authentication, users can access only the portal server. After passing the portal

authentication, they can access external networks.

A RADIUS server serves as the authentication/accounting server.

Network diagram

Figure 539 Network diagram for direct authentication (on a router)

Gateway : 2.2.2.1 /24

Configuration procedure

IP addresses are configured for devices as required and routes are available

between devices before the portal feature is enabled.

Configure the access device:

1 Configure a RADIUS scheme

# Create a RADIUS scheme named "rs1" and enter its view.

<Router> system-view

[Router] radius scheme rs1

# Set the server type to "extended".

[Router-radius-rs1] server-type extended

# Configure the primary authentication server, the primary accounting server, and

the keys for both servers to communicate.