3Com MSR 50 Series Configuration Manual page 2236

2236 C 129: V
HAPTER OICE
O
VERVIEW
Figure 649 Voice function configuration procedure
Configure number application for dial
No
Troubleshoot
Table 73 Description of the voice function configuration procedure
Step Operation
1 Connect the physical devices according to the network
diagram.
2 Configure links and routes and ensure that the links and
routes are available.
3 Determine whether number substitution is necessary.
If yes, configure number substitution for the dial plan.
If no, proceed with the steps below.
4 Configure POTS entity and VoIP entity
5 Configure related voice subscriber lines for voice entities
The physical characteristics of voice subscriber lines are
usually set to the defaults.
Start
Configure a link
connection
No
Is the link
available?
Yes
Yes
Is number
substitution
necessary?
No
Configure voice entity
Configure voice
subscriber line
plans
Configure voice
protocol
Is the call
established?
Yes
End
Configure number
substitution for dial
plans
Reference
-
Access Volume and
IP Routing Volume
Dial Plan in Voice
Volume.
VoIP in Voice Volume
VoIP and E1&T1 in
Voice Volume