Configuring Rip-2 Route Summarization - 3Com MSR 50 Series Configuration Manual

Configuring RIP-2 Route
Summarization
n
To do...
Enter interface view
Define an inbound additional
routing metric
Define an outbound additional
routing metric
The route summarization means that subnet routes in a natural network are
summarized with a natural network that is sent to other networks. This function
can reduce the size of routing tables.
Configure RIP-2 route automatic summarization
Disable RIP-2 route automatic summarization if you want to advertise all subnet
routes.
Follow these steps to configure route automatic summarization:
To do...
Enter system view
Enter RIP view
Enable RIP-2 automatic route
summarization
Advertise a summary route
You can configure RIP-2 to advertise a summary route on the specified interface.
To do so, use the following commands:
To do...
Enter system view
Enter RIP view
Disable RIP-2 automatic route
summarization
Exit to system view
Enter interface view
Configure to advertise a
summary route
You need disable RIP-2 route automatic summarization before advertising a
summary route on an interface.
Configuring RIP Advanced Functions
Use the command...
interface interface-type
interface-number
rip metricin value
rip metricout value
Use the command...
system-view
rip [ process-id ]
[ vpn-instance
vpn-instance-name ]
summary
Use the command...
system-view
rip [ process-id ] [ vpn-instance
vpn-instance-name ]
undo summary
quit
interface interface-type
interface-number
rip summary-address ip-address
{ mask | mask-length }
979
Remarks
--
Optional
0 by default
Optional
1 by default
Remarks
--
--
Optional
Enabled by default
Remarks
--
--
Required
Enabled by default
-
-
Required