3Com MSR 50 Series Configuration Manual page 1450

1450 C 78: MPLS L2VPN C
HAPTER ONFIGURATION
# On the interface connecting CE 1, namely Serial 2/0, create a Martini MPLS
L2VPN connection. The interface requires no IP address.
[PE1] interface serial 2/0
[PE1-Serial2/0] mpls l2vc 192.3.3.3 101
[PE1-Serial2/0] quit
3 Configure the P device
<Sysname> system-view
[Sysname] sysname P
[P] interface loopback 0
[P-LoopBack0] ip address 192.4.4.4 32
[P-LoopBack0] quit
# Configure the LSR ID and enable MPLS globally.
[P] mpls lsr-id 192.4.4.4
[P] mpls
# Configure the LSP establishment triggering policy.
[P-mpls] lsp-trigger all
[P-mpls] quit
# Enable LDP globally.
[P] mpls ldp
[P-mpls-ldp] quit
# Configure the interface connected with PE 1, namely Serial 2/0, and enable LDP
on the interface.
[P] interface serial 2/0
[P-Serial2/0] link-protocol ppp
[P-Serial2/0] ip address 10.1.1.2 24
[P-Serial2/0] mpls
[P-Serial2/0] mpls ldp
[P-Serial2/0] quit
# Configure the interface connected with PE 2, namely Serial 2/1, and enable LDP
on the interface.
[P] interface serial 2/1
[P-Serial2/1] link-protocol ppp
[P-Serial2/1] ip address 10.2.2.2 24
[P-Serial2/1] mpls
[P-Serial2/1] mpls ldp
[P-Serial2/1] quit
# Configure OSPF on the P device for establishing LSPs.
[P] ospf
[P-ospf-1] area 0
[P-ospf-1-area-0.0.0.0] network 10.1.1.2 0.0.0.255
[P-ospf-1-area-0.0.0.0] network 10.2.2.2 0.0.0.255
[P-ospf-1-area-0.0.0.0] network 192.4.4.4 0.0.0.0