Displaying And Maintaining Nat - 3Com MSR 50 Series Configuration Manual

1822 C 96: NAT C
HAPTER
Displaying and
Maintaining NAT
ONFIGURATION
To do...
Set the maximum connection
rate in a policy
Binding a connection-limit policy to a NAT module
Follow these steps to bind a connection-limit policy to a NAT module
To do...
Enter system view
Bind a connection-limit policy
to the NAT module
c
CAUTION:
A NAT module limits user connections based on the policy bound to it. Each
■
NAT module can be bound with one policy only.
The global connection-limit configuration does not take effect until you bind
■
the connection-limit policy with the NAT module.
To do...
Display information about the
NAT address pool
Display the aging time for
address translation
Display configurations about
all forms of NAT
Display the connection-limit
information
Display the address
translation information
configured
Display the internal server
information
Display the active connection
information
Display NAT statistics
Display information about the
connection-limit policy
Use the command...
limit rate max-rate
Use the command...
system-view
nat connection-limit-policy
policy-number
Use the command...
display nat address-group
display nat aging-time
display nat all
display nat connection-limit [ source
src-address { mask | mask-length } ]
[ destination dst-address { mask |
mask-length } ] [ destination-port { eq |
gt | lt | neq | range } port-number ]
[ vpn-instance vpn-instance-name ]
display nat outbound
display nat server
display nat session [ vpn-instance
vpn-instance-name ] [ source global
global-address | source inside
inside-address ] [ destination
dst-address ]
display nat statistics
display connection-limit policy
{ policy-number | all }
Remarks
Optional
100 by default
Remarks
-
Required
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view