Basic Configurations; Entering/Exiting System View; Configuring The Device Name; Configuring The System Clock - 3Com MSR 50 Series Configuration Manual

118

Basic Configurations

Entering/Exiting System
View
Configuring the Device
Name
Configuring the System
Clock
B C
ASIC
While performing basic configurations of the system, go to these sections for
information you are interested in:
"Basic Configurations" on page 2125
■
"CLI Features" on page 2133
■
This section covers the following topics:
"Entering/Exiting System View" on page 2125
■
"Configuring the Device Name" on page 2125
■
"Configuring the System Clock" on page 2125
■
"Configuring a Banner" on page 2129
■
"Configuring CLI Hotkeys" on page 2130
■
"Configuring User Levels and Command Levels" on page 2131
■
"Configuring Number of Concurrent Users" on page 2132
■
"Displaying and Maintaining Basic Configurations" on page 2132
■
To do...
Enter system view from user view
Return to user view from system view
n
With the quit command, you can return to the previous view. You can execute the
return command or press the hot key <Ctrl+Z> to return to user view.
To do...
Enter system view
Configure the device name sysname sysname

Configuring the system clock

To do...
Set the standard time clock datetime time date
ONFIGURATIONS
Use the command...
system-view
quit
Use the command...
system-view
Use the command...
Remarks
-
-
Remarks
-
Optional
The device name varies with
devices by default.
Remarks
Optional
Available in user view.