3Com MSR 50 Series Configuration Manual page 2340

2340 C 134: E1 T1 C
HAPTER AND ONFIGURATION
[RouterA-voice-dial] entity 0755 voip
# Configure a target match-template for the VoIP voice entity.
[RouterA-voice-dial-entity755] match-template 0755....
# Configure the target address of the VoIP voice entity.
[RouterA-voice-dial-entity755] address ip 2.2.2.2
2 On City B router
# Configure the IP address 2.2.2.2/24 for the interface Ethernet 2/0/
<RouterB> system-view
[RouterB] interface ethernet 2/0
[RouterB-Ethernet0/0] ip address 2.2.2.2 255.255.255.0
[RouterB-Ethernet0/0] quit
# Create an ISDN PRI set on interface E1 1/1.
[RouterB] system-view
[RouterB] controller e1 1/1
[RouterB-E1 1/1] pri-set
[RouterB-E1 1/1] quit
# Create a POTS voice entity for the ISDN PRI interface.
[RouterB] voice-setup
[RouterB-voice] dial-program
[RouterB-voice-dial] entity 2001 pots
# Configure a target match-template pointing to telephone number 0755-2001
for the POTS voice entity.
[RouterB-voice-dial-entity2001] match-template 07552001
# Associate the POTS voice entity with subscriber line 1/1:15.
[RouterB-voice-dial-entity2001] line 1/1:15
[RouterB-voice-dial-entity2001] send-number all
[RouterB-voice-dial-entity2001] quit
# Create a POTS voice entity for the ISDN PRI interface.
[RouterB-voice-dial] entity 2002 pots
# Configure a target match-template pointing to telephone number 0755-2002
for the POTS voice entity.
[RouterB-voice-dial-entity2002] match-template 07552002
# Associate the POTS voice entity with subscriber line 1/1:15.
[RouterB-voice-dial-entity2002] line 1/1:15
[RouterB-voice-dial-entity2002] send-number all
[RouterB-voice-dial-entity2002] quit