3Com MSR 50 Series Configuration Manual page 1664

1664 C 86: C
HAPTER ONGESTION
n
n
M
ANAGEMENT
To do...
Enter system view
Define a traffic behavior and
enter traffic behavior view
Configure AF and minimum
available bandwidth
Display traffic behavior
information
This behavior can apply only in output direction of an interface or ATM PVC.
■
The same traffic behavior must use the same standard to configure queue ef
■
and queue af, either bandwidth or percentage.
Under the same traffic behavior, queue ef, queue af and queue wfq cannot
■
be used at the same time.
2 Configuring EF and maximum bandwidth
Follow these steps to configure EF and maximum bandwidth
To do... Use the command...
Enter system view system-view
Define a traffic traffic behavior
behavior and enter behavior-name
traffic behavior view
Configure EF and queue ef bandwidth
maximum { bandwidth [ cbs burst ] |
bandwidth pct percentage
[ cbs-ratio ratio] }
Display traffic display traffic behavior
behavior { system-defined |
information user-defined }
[ behavior-name ]
The command can not be used together with queue af, queue-length, and
wred in traffic behavior view.
The behavior including EF cannot be associated with the default-class.
The same traffic behavior must use the same standard to configure queue ef and
queue af, either bandwidth or percentage.
The traffic behavior configured with ef queue cannot be associated with the
default class.
3 Configuring Weight Fair Queuing (WFQ)
Use the command...
system-view
traffic behavior
behavior-name
queue af bandwidth
{ bandwidth | pct
percentage }
display traffic behavior
{ system-defined |
user-defined }
[ behavior-name ]
Remarks
-
Required
behavior-name: Name of the traffic
behavior. It is not allowed to pre-define
traffic behavior for the system.
Required
Optional
The display command can be executed in
any view.
Remarks
-
Required
behavior-name: Name of the
traffic behavior. It is not
allowed to pre-define traffic
behavior for the system.
Required
Optional
The display command can be
executed in any view.