Configuring Poe Interfaces Through A Poe Configuration File - 3Com MSR 50 Series Configuration Manual

2178 C 123: P E C
HAPTER O
Configuring PoE
Interfaces Through a PoE
Configuration File
ONFIGURATION
To do...
Configure the
maximum power for the
PoE interface
Configure the PoE
mode for the PoE
interface
Configure a description
for the PD connected to
the PoE interface
A PoE configuration file is used to configure at the same time multiple PoE
interfaces with the same attributes to simplify operations. This configuration
method is a supplement to the common command line configuration.
Commands in a PoE configuration file are called configurations.
Follow these steps to configure PoE interfaces through a PoE configuration file:
To do...
Enter system view
Create a PoE configuration
file and enter PoE
configuration file view
Enable PoE for the PoE
interface
Configure the maximum
power for the PoE interface
Configure the PoE mode for
the PoE interface
Return to system view
Apply the PoE configuration
file to the current PoE
interface in PoE interface view
c
CAUTION:
After a PoE configuration file is applied to a PoE interface, other PoE
■
configuration files can not take effect on this PoE interface.
If a PoE configuration file is already applied to a PoE interface, you must
■
execute the undo apply poe-profile command to remove the application to
the interface before deleting or modifying the PoE configuration file.
Use the command...
poe max-power
max-power
poe mode { signal |
spare }
poe pd-description string
Use the command...
system-view
poe-profile profile-name
[ index ]
poe enable
poe max-power max-power
poe mode { signal | spare }
quit
interface interface-type
interface-number
apply poe-profile { index index
| name profile-name }
Remarks
Optional
By default, the maximum power on
the PoE interface is 15,400 milliwatts.
Optional
By default, the PoE mode is signal
(power over signal cables).
Optional
By default, no description for the PD
connected to the PoE interface is
available.
Remarks
-
Required
Required
By default, PoE is disabled
on a PoE interface.
Optional
By default, the maximum
power on the PoE interface
is 15,400 milliwatts.
Optional
By default, the PoE mode is
signal (power over signal
cables).
-
-