Enabling Private Line Auto Ring-Down; Configuring A Number Match Mode; Configuration Prerequisites; Configuring A Global Number Match Mode - 3Com MSR 50 Series Configuration Manual

2294 C 133: D
HAPTER IAL
Enabling Private Line
Auto Ring-Down
Configuring a Number
Match Mode
Configuration
Prerequisites
Configuring a Global
Number Match Mode
P C
LAN ONFIGURATION
With the private line auto ring-down (PLAR) function enabled, the voice gateway
automatically dials the specified called number (string) as soon as the subscriber
picks up the phone.
Follow these steps to configure the PLAR function:
To do...
Enter system view
Enter voice view
Enter voice subscriber line
view
Enable the PLAR function
The required basic configurations have been completed on POTS, VoIP, and VoFR
entities.
The number-match command is used to determine the number match mode:
longest match or shortest match. Suppose you configure match-template
0106688 and match-template 01066880011 respectively on two voice entities.
When a subscriber dials 01066880011:
If the router is configured to use the shortest match mode, it will match
■
match-template 0106688. Namely the router will establish a call connection
to 0106688 at the remote end, without processing the last four digits 0011.
If the router is configured to use the longest match mode, it will match
■
match-template 01066880011. Namely the router will establish a call
connection to 01066880011 at the remote end.
When a subscriber dials 0106688:
If the router is configured to use the shortest match mode, it will match
■
match-template 0106688.
If the router is configured to use the longest match mode, it will wait for
■
further digits. After the dial timer expires, the router will ignore the configured
longest match mode and automatically use shortest match to establish a call
connection.
When a subscriber dials 0106688#, if you configure the longest match mode and
a dial terminator "#" on the router, the router will as well ignore the configured
longest match mode and use shortest match mode to establish a call connection.
Follow these steps to configure a global number match mode:
Use the command...
system-view
voice-setup
subscriber-line line-number
private-line string
Remarks
-
-
-
Optional
Disabled by default