3Com MSR 50 Series Configuration Manual page 1402

1402 C 77: MPLS TE C
HAPTER ONFIGURATION
[RouterC-Ethernet1/1] mpls te max-reservable-bandwidth 5000
[RouterC-Ethernet1/1] quit
# Configure maximum link bandwidth and maximum reservable bandwidth on
Router D.
[RouterD] interface ethernet 1/0
[RouterD-Ethernet1/0] mpls te max-link-bandwidth 10000
[RouterD-Ethernet1/0] mpls te max-reservable-bandwidth 5000
[RouterD-Ethernet1/0] quit
Perform the display mpls te cspf tedb all command on each router to view
information about links in TEDB. Take Router A for example:
[RouterA] display mpls te cspf tedb all
Maximum Node Supported: 128
Current Total Node Number: 4
Id MPLS LSR-Id
1 2.2.2.9
2 3.3.3.9
3 4.4.4.9
4 1.1.1.9
6 Configure LDP
# Configure Router A.
[RouterA] mpls ldp
[RouterA-mpls-ldp] quit
[RouterA] interface ethernet 1/0
[RouterA-Ethernet1/0] mpls ldp
[RouterA-Ethernet1/0] quit
# Configure Router B.
[RouterB] mpls ldp
[RouterB-mpls-ldp] quit
[RouterB] interface ethernet 1/0
[RouterB-Ethernet1/0] mpls ldp
[RouterB-Ethernet1/0] quit
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] mpls ldp
[RouterB-Ethernet1/1] quit
# Configure Router C.
[RouterC] mpls ldp
[RouterC-mpls-ldp] quit
[RouterC] interface ethernet 1/0
[RouterC-Ethernet1/0] mpls ldp
[RouterC-Ethernet1/0] quit
[RouterC] interface ethernet 1/1
[RouterC-Ethernet1/1] mpls ldp
[RouterC-Ethernet1/1] quit
# Configure Router D.
Maximum Link Supported: 256
Current Total Link Number: 6
IGP Process-Id
OSPF 1
OSPF 1
OSPF 1
OSPF 1
Area Link-Count
0 2
0 2
0 1
0 1