3Com MSR 50 Series Configuration Manual page 1633

To do...
Enter system view
Configure TP policy
Display TP rule
Enter Enter
interface view interface
or port group view
view
Enter port
group view
Apply TP policy on the
interface
Display the TP information
on each interface
Configuring traffic policing based on ACL
Follow these steps to configure traffic policing based on ACL
To do...
Enter system view
Configure ACL rules
Enter interface Enter interface
view or port view
group view
Enter port
group view
Traffic Policing and Traffic Shaping Configuration
Use the command...
system-view
qos carl carl-index
{ precedence
precedence-value | mac
mac-address | dscp
dscp-list }
display qos carl
[ carl-index ]
interface interface-type
interface-number
port-group aggregation
agg-id
qos car { inbound |
outbound } carl carl-index
cir
committed-information-rate
[ cbs committed-burst-size
[ ebs excess-burst-size ] ]
[ green action ] [ red
action ]
display qos car interface
[ interface-type
interface-number ]
Use the command...
system-view
Refer to "Configuring ACLs"
on page 1881.
interface interface-type
interface-number
port-group aggregation
agg-id
Remarks
-
Required
Optional
The display command can be
executed in any view.
Use either command
Configured in interface view, the
setting is effective only on the
current interface; configured in
port group view, the setting is
effective on all the ports in the
current port group.
For the information about port
group configuration, refer to
"Link Aggregation
Configuration" on page 351.
Required
cbs is the traffic passed at CIR in
500 milliseconds by default. If
the traffic passed at CIR in 500
milliseconds is lower than 1875,
1875 is taken as the default
value.
ebs is 0 by default.
green action is pass by default.
red action is discard by default.
Optional
The display command can be
executed in any view
Remarks
-
Required
Use either command
Configured in interface view,
the setting is effective only on
the current interface;
configured in port group
view, the setting is effective
on all the ports in the current
port group.
For the information about
port group configuration,
refer to "Link Aggregation
Configuration" on page
1633
351.