Troubleshooting Voice Radius - 3Com MSR 50 Series Configuration Manual

Troubleshooting Voice
RADIUS
[RouterB-radius-sch1] server-type extended
# Configure the RADIUS scheme in the default domain.
[RouterB] domain system
[RouterB-isp-system] authentication voip radius-scheme sch1
[RouterB-isp-system] authorization voip radius-scheme sch1
[RouterB-isp-system] accounting voip radius-scheme sch1
[RouterB-isp-system] quit
# Configure the access number and set the dialing process to the card
number/password process.
[RouterB-voice] dial-program
[RouterB-voice-dial] gw-access-number 12345
[RouterB-voice-dial-anum12345] process-config cardnumber
# Configure the number of digits in a card number and password.
[RouterB-voice-dial-anum12345] card-digit 10
[RouterB-voice-dial-anum12345] password-digit 4
# Enable the authentication function.
[RouterB-voice-dial-anum12345] authentication
# Enable the authorization function.
[RouterB-voice-dial-anum12345] authorization
# Enable the accounting function.
[RouterB-voice-dial-anum12345] accounting
# Set the number of redial attempts to 3.
[RouterB-voice-dial-anum12345] redialtimes 3
n
The RADIUS scheme for voice RADIUS must be applied to the default domain
■
named system.
The configuration procedure does not cover the configurations of route, voice
■
subscriber line, and called number on the routers.
If a voice call is originated from an IP network to the voice gateway, the voice
■
gateway does not support the dialing of access numbers, and for one-stage
dialing, it supports only accounting, instead of authentication and
authorization
Symptom 1
After the accounting function is enabled and the accounting method is set to
start-ack or the authentication/authorization function is enabled, the voice
gateway fails to connect calls.

Troubleshooting Voice RADIUS

2423