Configuring Number Substitution; Configuration Prerequisites; Configuring Global Number Substitution - 3Com MSR 50 Series Configuration Manual

2298 C 133: D
HAPTER IAL
Configuring Number
Substitution
Configuration
Prerequisites
Configuring Global
Number Substitution
P C
LAN ONFIGURATION
To do...
Bind the
maximum-call-connection
set to the current voice
entity
A number substitution rule list defines some number substitution methods. It can
be used wherever number substitution is necessary. There is no limitation on
where and how many times it is used. Therefore, a number substitution rule list
may be bound globally or bound to different voice entities and subscriber lines.
The characteristics of global calling/called number substitution or calling/called
number substitution on voice entities and subscriber lines are as follows:
Global number substitution: The voice gateway substitutes calling/called
■
numbers of all incoming and outgoing calls according to the number
substitution rules configured in dial program view. Multiple number
substitution rule lists can be bound for global calling/called number
substitution of incoming and outgoing calls. If there is no match in the first
number substitution rule list, the voice gateway will turn to other number
substitution rule lists.
Number substitution on voice entities: The voice gateway substitutes the
■
calling/called number based on the number substitution rule lists bound to the
voice entity.
Number substitution on a specific subscriber line: The voice gateway
■
substitutes the calling/called number of incoming calls based on the number
substitution rules configured on the subscriber line.
The required basic configurations have been completed on POTS, VoIP, and VoFR
entities.
Follow these steps to configure global number substitution:
To do...
Enter system view
Enter voice view
Enter voice dial program view dial-program
Create a number substitution
rule list and enter voice
number-substitute view
Configure a dot-match rule
Use the command...
max-call set-number
Use the command...
system-view
voice-setup
number-substitute
list-number
dot-match { end-only |
left-right | right-left }
Remarks
Required
By default, no
maximum-call-connection set is
bound to a voice entity (that is, the
voice entity does not belong to
any maximum-call-connection set
and there is no limitation on the
number of call connections).
Remarks
-
-
-
-
Optional
By default, the dot match rule
is end-only.