Applying Policy - 3Com MSR 50 Series Configuration Manual

To do...
Specify the traffic behavior
for the class in the policy
Display configuration
information of specified
class of specified policy
and behavior associated
with these classes

Applying Policy

Configuration procedure
The qos apply policy command maps a policy to a physical interface or ATM
PVC. One policy mapping can be applied on multiple physical interfaces or ATM
PVC.
Follow these steps to apply a policy to the interface or ATM PVC:
To do...
Enter system view
Enter interface
view or port
group view
Apply a policy on the interface qos apply policy
Display policy configuration
information and operating
condition of specified
interface, specified PVC on
specified or all interface or
ATM PVC
Applying a policy in interface or ATM PVC view:
■
Use the command...
classifier tcl-name
behavior behavior-name
display qos policy
{ system-defined |
user-defined }
[ policy-name [ classifier
tcl-name ] ]
Enter interface
view
Enter port
group view
The VT interface referenced by common physical port and MP can apply the
policy configured with various features, including remark, car, gts, queue af,
queue ef, queue wfq, wred, etc.
Configuring Class-based Queuing
Remarks
Required
tcl-name: Class name. It must be
that of the defined class, the
system-defined or user-defined
class.
behavior-name: It must be that of
the defined traffic behavior name,
the system-defined or user-defined
traffic behavior name.
Optional
The display command can be
executed in any view.
Use the command...
system-view
interface interface-type
interface-number
port-group aggregation
agg-id
policy-name { inbound |
outbound [ dynamic ] }
display qos policy interface
[ interface-type
interface-number [ inbound |
outbound ] [ pvc { pvc-name
[ vpi/vci ] | vpi/vci } ] ]
1669
Remarks
-
Use either command
Configured in interface view,
the setting is effective only on
the current interface;
configured in port group
view, the setting is effective
on all the ports in the current
port group.
For the information about
port group configuration,
refer to "Link Aggregation
Configuration" on page 351.
Required
Optional
The display command can be
executed in any view.