3Com MSR 50 Series Configuration Manual page 1423

5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 35/48/74 ms
The sample output shows that CE 1 and CE 2 can reach each other.
7 Verify the configuration
Perform the display mpls lsp verbose command on PE 1. You can find an LSP
with LspIndex 2050. This is the LSP, that is, the MPLS TE tunnel, established using
CR-LDP.
[PE1] display mpls lsp verbose
------------------------------------------------------------------
------------------------------------------------------------------
No
IngressLsrID
LocalLspID
Tunnel-Interface
Fec
Nexthop
In-Label
Out-Label
In-Interface
Out-Interface
LspIndex
Token
LsrType
Bypass In Use
BypassTunnel
Mpls-Mtu
------------------------------------------------------------------
------------------------------------------------------------------
No
VrfIndex
Fec
Nexthop
In-Label
Out-Label
In-Interface
Out-Interface
LspIndex
Token
LsrType
Outgoing token
Label Operation
------------------------------------------------------------------
------------------------------------------------------------------
No
VrfIndex
Fec
Nexthop
In-Label
LSP Information: CRLDP LSP
: 1
: 2.2.2.2
: 1
: Tunnel1
: 3.3.3.3/32
: 10.0.0.2
: NULL
: 1024
: ----------
: POS5/1
: 2050
: 22004
: Ingress
: Not Exists
: Tunnel Index[---]
: 1500
LSP Information: BGP
: 2
: vpn1
: 192.168.1.0/24
: 192.168.1.1
: 1024
: NULL
: ----------
: ----------
: 8193
: 0
: Egress
: 0
: POP
LSP Information: LDP LSP
: 3
:
: 2.2.2.2/32
: 127.0.0.1
: 3
MPLS TE Configuration Example
LSP
1423