Configuring Receive And Transit Signaling - 3Com MSR 50 Series Configuration Manual

2332 C 134: E1
HAPTER AND
Configuring Receive and
Transit Signaling
T1 C
ONFIGURATION
Configuring the delay start mode
Follow these steps to configure the delay start mode:
To do...
Enter system view
Enter E1/T1 interface view
Create a TS set for digital
E&M signaling and select the
delay start mode
Exit E1/T1 interface view
Enter voice view
Enter digital E&M voice
subscriber line view
Configure the maximum
duration of delay signal in
delay start mode
Configure the delay that the
called party must wait before
sending a delay signal after it
detects a seizure signal
Configuring the wink start mode
Follow these steps to configure the wink start mode:
To do...
Enter system view
Enter E1/T1 interface view
Create a TS set for digital
E&M signaling and select the
immediate start mode
Exit E1/T1 interface view
Enter voice view
Enter digital E&M voice
subscriber line view
Configure the maximum time
the calling party waits for
wink signal after sending the
seizure signal in wink start
mode
Configure the maximum
duration of the wink signal
sent by the called party in
wink start mode
Configure the minimum delay
the called party must wait
before sending a wink signal
in wink-start mode
Follow these steps to configure receive and transmit signaling:
To do...
Enter system view
Use the command...
system-view
controller { e1 | t1 } number
timeslot-set ts-set-number
timeslot-list timeslots-list
signal e&m-delay
quit
voice-setup
subscriber-line
slot-numbe:ts-set-number
delay hold millseconds
delay rising millseconds
Use the command...
system-view
controller { e1 | t1 } number
timeslot-set ts-set-number
timeslot-list timeslots-list
signal e&m-wink
quit
voice-setup
subscriber-line
slot-numbe:ts-set-number
delay wink-rising
millseconds
delay wink-hold millseconds Optional
delay send-wink millseconds Optional
Use the command...
system-view
Remarks
-
-
Required
-
-
-
Optional
400 milliseconds by default.
Optional
300 milliseconds by default.
Remarks
-
-
Required
-
-
-
Optional
2,000 milliseconds by default.
500 milliseconds by default.
2,00 milliseconds by default.
Remarks
-