3Com MSR 50 Series Configuration Manual page 1394

1394 C 77: MPLS TE C
HAPTER ONFIGURATION
# Configure Router D.
[RouterD] isis 1
[RouterD-isis-1] cost-style wide
[RouterD-isis-1] traffic-eng level-2
[RouterD-isis-1] quit
5 Configure MPLS TE attributes of links
# Configure maximum link bandwidth and maximum reservable bandwidth on
Router A.
[RouterA] interface ethernet 1/0
[RouterA-Ethernet1/0] mpls te max-link-bandwidth 10000
[RouterA-Ethernet1/0] mpls te max-reservable-bandwidth 5000
[RouterA-Ethernet1/0] quit
# Configure maximum link bandwidth and maximum reservable bandwidth on
Router B.
[RouterB] interface ethernet 1/0
[RouterB-Ethernet1/0] mpls te max-link-bandwidth 10000
[RouterB-Ethernet1/0] mpls te max-reservable-bandwidth 5000
[RouterB-Ethernet1/0] quit
[RouterB] interface pos 5/0
[RouterB-POS5/0] mpls te max-link-bandwidth 10000
[RouterB-POS5/0] mpls te max-reservable-bandwidth 5000
[RouterB-POS5/0] quit
# Configure maximum link bandwidth and maximum reservable bandwidth on
Router C.
[RouterC] interface ethernet 1/0
[RouterC-Ethernet1/0] mpls te max-link-bandwidth 10000
[RouterC-Ethernet1/0] mpls te max-reservable-bandwidth 5000
[RouterC-Ethernet1/0] quit
[RouterC] interface pos 5/0
[RouterC-POS5/0] mpls te max-link-bandwidth 10000
[RouterC-POS5/0] mpls te max-reservable-bandwidth 5000
[RouterC-POS5/0] quit
# Configure maximum link bandwidth and maximum reservable bandwidth on
Router D.
[RouterD] interface ethernet 1/0
[RouterD-Ethernet1/0] mpls te max-link-bandwidth 10000
[RouterD-Ethernet1/0] mpls te max-reservable-bandwidth 5000
[RouterD-Ethernet1/0] quit
6 Create an MPLS TE tunnel
# Create an MPLS TE tunnel on Router A.
[RouterA] interface tunnel 1
[RouterA-Tunnel1] ip address 7.1.1.1 255.255.255.0
[RouterA-Tunnel1] tunnel-protocol mpls te
[RouterA-Tunnel1] destination 4.4.4.9
[RouterA-Tunnel1] mpls te tunnel-id 10