Command View - 3Com MSR 50 Series Configuration Manual

2240 C 129: V
HAPTER OICE

Command View

O
VERVIEW
The dial plan configuration directly affects the selection of voice entity and the
final call connection. The dial plan configuration involves global configuration,
voice subscriber line configuration, and voice entity configuration. You can select
one or more configurations for a dial plan. The global configuration acts on calls
of the whole VoIP gateway, the voice entity configuration on those of the voice
entity, and the voice subscriber line configuration on those of the voice subscriber
line. For detailed configurations, refer to
The voice subscriber line configuration, voice entity configuration, voice protocol
configuration, and dial plan configuration are implemented via command lines.
Command views are the command line interfaces of the voice router. Most voice
functions are implemented in corresponding view. The command views of the
voice router are arranged in a hierarchical structure. You can enter different
function views under system view, and sub-function view(s) under function views.
Figure 650 shows the command view structure of the voice router.
Figure 650 Hierarchical command view structure of the voice router
System
view
Table 74 Basic functions of voice command views
View name Function
System view Configure
system
parameters
Ethernet Configure
interface view Ethernet
interface
parameters
Loopback Configure
interface view loopback
interface
parameters
E1/T1 interface Create a TS
view group
CAS view Configure
signaling
parameters
"Dial Plan Configuration" on page
Ethernet interface view
E1/T1 interface view
Loopback interface view
Dial interface view
......
Voice view
Voice GK client
Command to
Prompt enter
[system] Log in to the
system
[system-Etherne Key in interface
t1/1] ethernet 1/1 in
any view
[system-LoopBa Key in interface
ck1] loopback 1 in any
view
[system-E1 1/0] Key in controller
e1 1/0 in system
view
[system-cas Key in cas in E1/T1
1/0:5] interface view
CAS view
Voice subscriber
line view
Voice entity view
Voice dial
program view
Voice number
substitution view
view
Voice SIP
client view
Command to quit
logout.
Disconnect telnet
connection with the
VoIP gateway.
quit.
Return to system
view
quit.
Return to system
view
quit.
Return to system
view
quit
Return to E1/T1
interface view
2289.