Pinging An Ipx Network; Configuration Prerequisites; Configuration Procedure; Displaying And Maintaining Ipx Configuration - 3Com MSR 50 Series Configuration Manual

Pinging an IPX
Network
Configuration
Prerequisites

Configuration Procedure

Displaying and
Maintaining IPX
Configuration
IPX Configuration
Example
You need to complete the IPX basic configuration before this task.
Follow these steps to ping an IPX network:
To do...
Ping an IPX network to check
connectivity
Operation
Display IPX interface
information
Display IPX packets statistics
Display the IPX service
information table
Display IPX routing
information
Clear IPX statistics
Clear IPX routing information
Networking requirement
Router A and Router B are connected through an IPX network. The IPX address
■
of Ethernet 1/0 on Router A is 1000.00e0-fc01-0000 and that on Router B is
1001.00e0-fc01-0001.
The server is installed with NetWare 4.1 and its IPX address is
■
2.0000-0c91-f61f, packet encapsulation format is Ethernet_II. The client is a
PC. Its network ID is 3, and packet encapsulation format is SNAP.
The server provides file and printing services. The client can access these
■
services through the IPX network.
Use the command...
ping ipx network.node [ -c
count | -t timeout | -s size ] *
Command
display ipx interface
[ interface-type
interface-number ]
display ipx statistics
display ipx service-table
[ inactive | name name |
network network | order
{ network | type } | type
service-type ] [ verbose ]
display ipx routing-table
[ network [ verbose ] |
protocol { default | direct |
rip | static } [ inactive |
verbose ] | statistics |
verbose ]
reset ipx statistics
reset ipx routing-table
statistics protocol { all |
default | direct | rip | static }

Pinging an IPX Network

2225
Remark
Required
Available in any view
Remark
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view