2042
C
110: N
HAPTER
ET
Configuring Attributes
of NetStream UDP
Packets
Configuring Attributes
of NetStream UDP
Packets
S
C
TREAM
ONFIGURATION
You may configure the source interface, destination address, and destination port
number for NetStream UDP packets, where the address of the source interface is
used as the source address.
The BGP AS field is supported in NetStream UDP packets. You can select to take
the original AS number or peer AS number as the number of the AS where the
specified IP address belongs.
Follow these steps to configure attributes of NetStream UDP packets:
To do...
Enter system view
Configure the destination
address and port number for
UDP packets
Configure the source
interface for UDP packets
Configure the type of AS
numbers to be recorded in
NetStream cache entries and
the version of UDP packets
c
CAUTION:
You can configure the attributes of NetStream statistics packets in aggregation
■
view. If you configure the attributes of NetStream statistics packets in both
aggregation view and system view, the device matches the configuration in
aggregation view first.
Configuration in NetStream aggregation view affects only version 8 packets.
■
Configuration in system view affects version 5 packets and, if no attributes of
NetStream statistics packets are configured in NetStream aggregation view,
also affects version 8 packets.
The ip netstream export version command can be executed only in system
■
view and not in aggregation view. Therefore, you can set the UDP packet
version in system view.
For the related information of AS, refer to
■
Use the command...
system-view
ip netstream export host
ip-address udp-port
ip netstream export source
interface interface-type
interface-number
ip netstream export
version version-number
[ origin-as | peer-as ]
"BGP Configuration" on page
Remarks
-
Required
Optional
The interface to export
NetStream statistics packets is
taken as the source interface
by default.
Optional
A single stream is sent in
version 5 NetStream statistics
packets, aggregation statistics
information is sent in version
8 NetStream statistics packets
and the AS option is peer-as
by default.
825.
Need help?
Do you have a question about the MSR 50 Series and is the answer not in the manual?