3Com MSR 50 Series Configuration Manual page 1951

[RouterB] sftp server enable
#
2 Configure the client (Router A)
# Configure an IP address for interface Ethernet 1/1.
<RouterA> system-view
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] ip address 192.168.0.2 255.255.255.0
[RouterA-Ethernet1/1] quit
[RouterA] quit
# Establish a connection with the remote SFTP server and enter SFTP client view.
<RouterA> sftp 192.168.0.1
Input Username: client001
Trying 192.168.0.1 ...
Press CTRL+K to abort
Connected to 192.168.0.1 ...
The Server is not authenticated. Do you continue access it? [Y/N]:y
Do you want to save the server's public key? [Y/N]:y
Enter password:
sftp-client>
# Display files under the current directory of the server, delete the file of z, and
check that the file is deleted successfully.
sftp-client> dir
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
drwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
sftp-client> delete z
The following File will be deleted:
/z
Are you sure to delete it? [Y/N]:y
This operation may take a long time.Please wait...
File successfully Removed
sftp-client> dir
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
drwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
# Add a directory named new1 and check that it is created successfully.
sftp-client> mkdir new1
New directory created
sftp-client> dir
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
SFTP Configuration Example
nogroup 1759 Aug 23 06:52 config.cfg
nogroup 225 Aug 24 08:01 pubkey2
nogroup 283 Aug 24 07:39 pubkey1
nogroup 0 Sep 01 06:22 new
nogroup 225 Sep 01 06:55 pub
nogroup 0 Sep 01 08:00 z
nogroup 1759 Aug 23 06:52 config.cfg
nogroup 225 Aug 24 08:01 pubkey2
nogroup 283 Aug 24 07:39 pubkey1
nogroup 0 Sep 01 06:22 new
nogroup 225 Sep 01 06:55 pub
nogroup 1759 Aug 23 06:52 config.cfg
nogroup 225 Aug 24 08:01 pubkey2
1951