Http Test Configuration Example - 3Com MSR 50 Series Configuration Manual

2032 C 109: NQA O
HAPTER
HTTP Test Configuration
Example
VERVIEW
username is admin, the login password is systemtest, and the file to be
transferred to the FTP server is config.txt.
Network diagram
Figure 600 Network diagram for FTP
NQA client
10 .1.1.1/16
Device A
Configuration procedure
# Create an FTP test group and configure related test parameters.
<DeviceA> system-view
[DeviceA] nqa entry admin test
[DeviceA-nqa-admin-test] type ftp
[DeviceA-nqa-admin-test-ftp] destination ip 10.2.2.2
[DeviceA-nqa-admin-test-ftp] source ip 10.1.1.1
[DeviceA-nqa-admin-test-ftp] operation put
[DeviceA-nqa-admin-test-ftp] username admin
[DeviceA-nqa-admin-test-ftp] password systemtest
[DeviceA-nqa-admin-test-ftp] filename config.txt
[DeviceA-nqa-admin-test-ftp] quit
# Enable the FTP test.
[DeviceA] nqa schedule admin test start-time now lifetime forever
# Display results of an FTP test.
[DeviceA] display nqa result admin test
NQA entry(admin admin, tag test) test results:
Destination IP address: 10.2.2.2
Send operation times: 1 Receive response times: 1
Min/Max/Average round trip time: 173/173/173
Square-Sum of round trip time: 29929
Last succeeded probe time: 2007-03-14 13:28:48.5
Extend results:
Packet lost in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Network requirements
Use the HTTP function to test the connection with a specified HTTP server and the
time required to obtain data from the HTTP server.
FTP server
10 .2 .2.2/16
IP network
Device B