Displaying And Maintaining Device Configuration - 3Com MSR 50 Series Configuration Manual

2104 C 114: F
HAPTER ILE
Displaying and
Maintaining Device
Configuration
S M C
YSTEM ANAGEMENT ONFIGURATION
n
Before restoring a configuration file, you should ensure that the server is
■
reachable, the server is enabled with TFTP service, and the client has permission
to read and write.
After the command is successfully executed, you can use the display startup
■
command (in user view) to verify if the filename of the startup configuration
file is the same with the filename argument, and use the dir command to verify
if the restored file exists.
To do...
Display the configuration file
saved in the storage device
Display the configuration file
used for this and next startup
Display the validated
configuration in current view
Display current configuration
n
For detailed description of the commands display this and display
current-configuration, refer to
Use the command...
display saved-configuration
[ by-linenum ]
display startup
display this [ by-linenum ]
display current-configuration
[ [ configuration [ configuration ] |
controller | interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ |
{ begin | include | exclude } text ] ]
"Basic Configurations" on page
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view
2125.