3Com MSR 50 Series Configuration Manual page 2046

2046 C 110: N S C
HAPTER ET TREAM ONFIGURATION
[RouterA] ip netstream max-entry 5000
# Configure the destination address, destination port, and source address for
version 5 UDP packets.
[RouterA] ip netstream export host 3.1.1.2 5000
[RouterA] ip netstream export source interface ethernet 1/0
# Configure AS aggregation mode and the destination address, destination port
and source port of the exported UDP packets in this mode.
[RouterA] ip netstream aggregation as
[RouterA-aggregation-as] enable
[RouterA-aggregation-as] ip netstream export host 3.1.1.2 2000
[RouterA-aggregation-as] ip netstream export source interface ethernet 1/1
[RouterA-aggregation-as] quit
# Configure protocol-port aggregation mode and the destination address,
destination port and source port of the exported UDP packets in this mode.
[RouterA] ip netstream aggregation protocol-port
[RouterA-aggregation-protport] enable
[RouterA-aggregation-protport] ip netstream export host 3.1.1.2 3000
[RouterA-aggregation-protport] ip netstream export source interface ethernet 1/1
[RouterA-aggregation-protport] quit
# Configure source-prefix aggregation mode and the destination address,
destination port and source port of the exported UDP packets in this mode.
[RouterA] ip netstream aggregation source-prefix
[RouterA-aggregation-srcpre] enable
[RouterA-aggregation-srcpre] ip netstream export host 3.1.1.2 4000
[RouterA-aggregation-srcpre] ip netstream export source interface ethernet 1/1
[RouterA-aggregation-srcpre] quit
# Configure destination-prefix aggregation mode and the destination address,
destination port and source port of the exported UDP packets in this mode.
[RouterA] ip netstream aggregation destination-prefix
[RouterA-aggregation-dstpre] enable
[RouterA-aggregation-dstpre] ip netstream export host 3.1.1.2 5000
[RouterA-aggregation-dstpre] ip netstream export source interface ethernet1/1
[RouterA-aggregation-dstpre] quit
# Configure prefix aggregation mode and the destination address, destination
port and source port of the exported UDP packets in this mode.
[RouterA] ip netstream aggregation prefix
[RouterA-aggregation-prefix] enable
[RouterA-aggregation-prefix] ip netstream export host 3.1.1.2 7000
[RouterA-aggregation-prefix] ip netstream export source interface ethernet 1/1
[RouterA-aggregation-prefix] quit
2 Configure Router B
# Configure interface Ethernet 1/0.
<RouterB> system-view
[RouterB] interface ethernet 1/0
[RouterB-Ethernet1/0] ip address 1.1.1.2 255.255.0.0
[RouterB-Ethernet1/0] quit