3Com MSR 50 Series Configuration Manual page 1413

------------------------------------------------------------------
FEC
4.4.4.4/32
[RouterB] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label
4.4.4.4/32 1024/1024
3.3.3.3/32 NULL/1024
[RouterC] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label
4.4.4.4/32 1024/3
3.3.3.3/32 3/NULL
[RouterD] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label
4.4.4.4/32 3/NULL
[RouterE] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label
3.3.3.3/32 1024/3
Perform the display mpls te tunnel command on each router. You can find that
two MPLS TE tunnels are traversing Router B and Router C.
[RouterA] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
[RouterB] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
2.2.2.2:1 3.3.3.3
[RouterC] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
2.2.2.2:1 3.3.3.3
[RouterD] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
[RouterE] display mpls te tunnel
LSP-Id Destination
2.2.2.2:1 3.3.3.3
Perform the display mpls lsp verbose command on Router B. You can find that
the bypass tunnel is bound with the protected interface Ethernet 1/1 and is
currently unused.
[RouterB] display mpls lsp verbose
-------------------------------------------------------------------
In/Out Label In/Out IF
NULL/1024 -/Eth1/0
In/Out IF
Eth1/0/Eth1/1
-/POS5/0
In/Out IF
Eth1/1/Eth1/0
POS5/0/-
In/Out IF
Eth1/0/-
In/Out IF
POS5/0/POS5/1
In/Out-If
-/Eth1/0
In/Out-If
Eth1/0/Eth1/1
-/POS5/0
In/Out-If
Eth1/1/Eth1/0
POS5/0/-
In/Out-If
Eth1/0/-
In/Out-If
POS5/0/POS5/1
MPLS TE Configuration Example
Vrf Name
Vrf Name
Vrf Name
Vrf Name
Vrf Name
Name
Tunnel4
Name
Tunnel4
Tunnel5
Name
Tunnel4
Tunnel5
Name
Tunnel4
Name
Tunnel5
1413