Configuring Basic Functions; Configuration Prerequisites; Configuration Procedure; Configuring Fxs Voice Subscriber Line - 3Com MSR 50 Series Configuration Manual

Configuring Basic
Functions
Configuration
Prerequisites

Configuration Procedure

Configuring FXS Voice
Subscriber Line
Configuration
Prerequisites

Configuring CID

The router is equipped with FXS, FXO, and E&M interface cards and the router
supports the voice interface cards.
n
The commands in FXS, FXO, or E&M voice subscriber line view are applicable only
when the router is equipped with FXS, FXO, and E&M interface cards.
This section only describes the basic functions of voice subscriber lines generated
by voice cards. Configurations specific to a voice subscriber line will be introduced
individually.
Follow these steps to complete the basic functions of voice subscriber lines:
To do...
Enter system view
Enter voice view
Enter voice subscriber line view subscriber-line line-number -
Configure voice subscriber-line
description
Tear down the voice subscriber
line
The router is equipped with an FXS interface card.
The basic functions of the FXS voice subscriber lines are configured.
Follow these steps to configure CID:
To do...
Enter system view
Enter voice view
Enter FXS voice
subscriber line view
Enable CID
Enable calling number
sending
Use the command...
system-view
voice-setup
description string
shutdown
Use the command...
system-view
voice-setup
subscriber-line
line-number
cid display
cid send

Configuring Basic Functions

Remarks
-
-
Optional
No description by default.
Optional
Up by default.
Remarks
-
-
-
Optional
Enabled by default.
Optional
Enabled by default
2251