Establishing A Connection Between The Ssh Client And The Server - 3Com MSR 50 Series Configuration Manual

Establishing a
Connection Between the
SSH Client and the
Server
To do...
Enter system view
Enable the device to support
first-time authentication
Disable first-time authentication
For successful authentication of an SSH client not supporting first-time
authentication, the server host public key must be configured on the client and
the public key name must be specified.
Follow these steps to disable first-time authentication:
To do...
Enter system view
Disable first-time
authentication support
Configure the server
public key
Specify the host public
key name of the server
Follow these steps to establish the connection between the SSH client and the
server:
Configuring the Device as an SSH Client
Use the command...
system-view
ssh client first-time
Use the command...
system-view
undo ssh client
first-time
Refer to "Configuring a
Client Public Key" on
page 1925
ssh client
authentication server
server assign publickey
keyname
Remarks
-
Optional
By default, first-time
authentication is supported
on a client.
Remarks
-
Optional
By default, first-time authentication is
supported on a client.
Required
The method of configuring server public
key on the client is similar to that of
configuring client public key on the
server.
Required
1929