Configuring A Dial Prefix; Configuration Prerequisites; Configuration Procedure; Displaying And Maintaining Dial Plan Configuration - 3Com MSR 50 Series Configuration Manual

Configuring a Dial
Prefix
Configuration
Prerequisites

Configuration Procedure

Displaying and
Maintaining Dial Plan
Configuration
Dial Plan
Configuration
Examples
Configuring Number
Substitution
To do...
Enter system view
Enter voice view
Enter voice dial program view dial-program
Enter POTS voice entity view
Configure a number sending
mode
Bind a number template to
the local voice entity
You have configured the required basic functions of POTS and VoIP entities.
Follow these steps to configure a dial prefix:
To do...
Enter system view
Enter voice view
Enter voice dial program view dial-program
Enter POTS entity view
Configure a dial prefix
Bind a number template to
the local voice entity
To do...
Display information of the
configured number
substitution rule lists
Network requirements
There is a PBX to form a local telephony network respectively at place A and place
B. These two local telephony networks communicate through two voice gateways.
Use the command...
system-view
voice-setup
entity entity-number pots
send-number { digit-number
| all | truncate }
match-template match-string
Use the command...
system-view
voice-setup
entity entity-number pots
dial-prefix string
match-template
match-string
Use the command...
display voice
number-substitute
[ list-tag ]

Configuring a Dial Prefix

Remarks
-
-
-
Required
Required
By default, the truncate
mode is used.
Required
By default, no number
template is bound to the local
or trunk voice subscriber line.
Remarks
-
-
-
-
Required
No dial prefix by default.
Required
By default, no number
template is bound to the local
or trunk voice subscriber line.
Remarks
Available in any view
2301