3Com MSR 50 Series Configuration Manual page 2226

2226 C 128: IPX C
HAPTER ONFIGURATION
Network diagram
Figure 646 Network diagram for IPX configuration (on routers)
Eth1/0
1000.00e0 -fc01-0000
Router A
Eth1/1
2.00 e0-fc01 -0002
2.0000 -0c91-f61f
Server
Configuration procedure
Configure Router A
# Enable IPX.
<RouterA> system-view
[RouterA] ipx enable
# Enable IPX on the interface Ethernet 1/1, with the network ID being 2.
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] ipx network 2
# Set the packet encapsulation format on the Ethernet interface to Ethernet_II.
[RouterA-Ethernet1/1] ipx encapsulation ethernet-2
[Sysname-Ethernet1/1] quit
# Enable IPX on the interface Ethernet 1/0, with the network ID being 1000.
[RouterA] interface ethernet 1/0
[RouterA-Ethernet1/0] ipx network 1000
[RouterA-Ethernet1/0] quit
Configure Router B.
# Enable IPX.
<RouterB> system-view
[RouterB] ipx enable
# Enable IPX on the interface Ethernet 1/1, with the network ID being 3.
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] ipx network 3
IPX
Eth1/0
1001 .00 e0-fc01-0001
Router B
Eth1/1
3 .00 e0-fc01 -0003
Client