Resetting An Oap Module - 3Com MSR 50 Series Configuration Manual

2188 C 124: OAP M
HAPTER
Resetting an OAP
Module
C
ODULE ONFIGURATION
When the Linux operating system is operating abnormally or under other
anomalies, you can reset an OAP module by performing the following operation,
which equals to resetting the OAP module by pressing the reset button on the
OAP module.
To do...
Reset an OAP module
n
Only users at management level can execute this command.
c
CAUTION: Reset of the OAP module may cause data loss and service interruption.
Therefore, you should save the data on Linux OS and shut down the Linux OS to
avoid service interruption and hardware data loss.
Use the command...
oap reboot slot slot-number Required
Remarks
Available in user view.