Setting To Output System Information To The Log Buffer; Configuring To Output System Information To The Snmp Nms - 3Com MSR 50 Series Configuration Manual

2146 C 119: I
HAPTER NFORMATION
Setting to Output
System Information to
the Log Buffer
Configuring to Output
System Information to
the SNMP NMS
C C
ENTER ONFIGURATION
To do...
Configure the format of the
time stamp
To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output to
the log buffer and specify the
buffer size
Configure the output rules of
the system information
Configure the format of the
timestamp
To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output
to the SNMP NMS
Use the command...
info-center timestamp
{ debugging | log | trap | }
{ boot | date | none }
Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center logbuffer
[ channel { channel-number |
channel-name } | size
buffersize ] *
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug
{ level severity | state state }*
| log { level severity | state
state }* | trap { level severity |
state state } * ] *
info-center timestamp
{ debugging | log | trap | }
{ boot | date | none }
Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center snmp channel
{ channel-number |
channel-name }
Remarks
Optional
The time stamp for log, trap
and debug information is
date by default.
Remarks
-
Optional
Enabled by default
Optional
Refer to Table 69 for default
channel names.
Optional
System information is output
to the log buffer by default
with channel 4 (known as
logbuffer) as the default
channel and a default buffer
size of 512.
Optional
Refer to Table 71 for the
output rules of the system
information.
Optional
The time stamp for log, trap
and debug information is
date by default.
Remarks
-
Optional
Enabled by default
Optional
Refer to Table 69 for default
channel names.
Optional
System information is output
to the SNMP NMS by default
with channel 5 (known as
snmpagent) as the default
channel