Configuring Device Management; Registering The Software; Rebooting A Device - 3Com MSR 50 Series Configuration Manual

2006 C 108: D
HAPTER EVICE
Configuring Device
Management
Registering the
Software

Rebooting a Device

M
ANAGEMENT
n
The support for this feature and the trial period vary with devices.
Software register is provided on the device to protect the authorized users' legal
rights to use the software. Trial period is set on the software with this function and
users are required to register the serial number of the software in the trial period.
If the software has not been registered until the trial period expires, the system
automatically restarts every 30 minutes.
You can obtain a registration serial number through buying letter of authorization
of the software.
You can use the license register serial-number command or log onto the
network management interface and then enter the serial number to finish
software registration; and you can use the display license command or log onto
the network management interface to view the soft registration information of
the device.
Follow these steps to register the software:
To do...
Register the software
n
Only users with the management level can execute the command.
■
To avoid the inconvenience brought to you by restarting the system because of
■
trial period expiration, purchase letter of authorization of the software in the
trial period and register the software.
When a fault occurs to a running device, you can remove the fault by rebooting
the device, depending on the actual situation. You can set a time at which the
device can automatically reboot. You can also set a delay so that the device can
automatically reboot in the delay.
Follow these steps to reboot a device:
To do...
Reboot a card, subcard, or the whole
system
Use the command...
license register
serial-number
Use the command...
reboot [ slot
slot-number ]
Remarks
Required
Available in user view
Remarks
Optional
Available in user view.