Configuring A Number Priority Peer; Configuration Prerequisites; Configuration Procedure - 3Com MSR 50 Series Configuration Manual

2296 C 133: D
HAPTER IAL
Configuring a Number
Priority Peer
Configuration
Prerequisites

Configuration Procedure

P C
LAN ONFIGURATION
To do...
Enter system view
Enter voice view
Enter voice dial program view dial-program
Enter voice entity view
Configure the voice entity
priority
Exit voice entity view
Configure voice entity type
selection priority rules
Configure voice entity
selection priority rules
Configure the maximum
number of voice entities
found
Enter voice entity view
Disable the voice entity search
function
n
The voice entity type selection priority rule takes precedence over the voice
■
entity selection priority rule.
The priority of a value with a T (for example, 3.T) is higher than that of the
■
same value without a T (for example, 3).
The required basic configurations have been completed on POTS, VoIP, and VoFR
entities.
Follow these steps to configure a number priority peer:
To do...
Enter system view
Enter voice view
Enter voice dial program view dial-program
Use the command...
system-view
voice-setup
entity entity-number { pots |
vofr | voip }
priority priority-order
quit
select-rule type-first
1st-type 2nd-type 3rd-type
select-rule rule-order
1st-rule [ 2nd-rule ]
[ 3rd-rule ]
select-rule search-stop
max-number
entity entity-number { pots |
vofr | voip }
select-stop
Use the command...
system-view
voice-setup
Remarks
-
Required
Required
-
Optional
0 by default.
-
Optional
By default, voice entities are
not selected according to their
types.
Optional
By default, voice entities are
selected in sequence of exact
match, priority, random
selection, and longest idle
time.
Optional
By default, the maximum
number of voice entities
found is 128.
-
Optional
By default, the voice entity
search function is enabled.
Remarks
-
-
-