3Com MSR 50 Series Configuration Manual page 1414

1414 C 77: MPLS TE C
HAPTER ONFIGURATION
-------------------------------------------------------------------
No
IngressLsrID
LocalLspID
Tunnel-Interface
Fec
Nexthop
In-Label
Out-Label
In-Interface
Out-Interface
LspIndex
Token
LsrType
Bypass In Use
BypassTunnel
Mpls-Mtu
No
IngressLsrID
LocalLspID
Tunnel-Interface
Fec
Nexthop
In-Label
Out-Label
In-Interface
Out-Interface
LspIndex
Token
LsrType
Bypass In Use
BypassTunnel
Mpls-Mtu
6 Verify the FRR function
# Shut down the protected outgoing interface on PLR.
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] shutdown
%Sep 7 08:53:34 2004 RouterB IFNET/5/UPDOWN:Line protocol on the in
terface Ethernet1/1 turns into DOWN state
Perform the display interface tunnel 4 command on Router A to identify the
state of the primary LSP. You can find that the tunnel interface is still up.
Perform the display mpls te tunnel-interface command on Router A to verify
the configuration of the tunnel interface.
[RouterA] display mpls te tunnel-interface
Tunnel Name
Tunnel Desc
Tunnel State Desc
Tunnel Attributes
LSP ID
Session ID
Admin State
LSP Information: RSVP LSP
: 1
: 1.1.1.1
: 1
: Tunnel4
: 4.4.4.4/32
: 3.1.1.2
: 1024
: 1024
: Ethernet1/0
: Ethernet1/1
: 4097
: 22001
: Transit
: Not Used
: Tunnel Index[Tunnel5], InnerLabel[1024]
: 1500
: 2
: 2.2.2.2
: 1
: Tunnel5
: 3.3.3.3/32
: 3.2.1.2
: NULL
: 1024
: ----------
: POS5/0
: 4098
: 22002
: Ingress
: Not Exists
: Tunnel Index[---]
: 1500
: Tunnel4
: Tunnel4 Interface
: CR-LSP is up
:
: 1.1.1.1:1
: 10
: UP Oper State : UP