Rsh Configuration Example - 3Com MSR 50 Series Configuration Manual

1874 C 99: RSH C
HAPTER
RSH Configuration
Example
ONFIGURATION
Network requirements
As shown in Figure
Windows 2000 and has had RSH daemon service started. The requirement is to set
the time of the host remotely from the router.
n
Windows NT, 2000, XP, and 2003 are shipped with no RSH daemon. Therefore,
the RSH daemon must be obtained and installed separately on the remote host.
Network diagram
Figure 546 Network diagram for RSH configuration
Route
Configuration Procedure
On the remote host, check that the RSH daemon has been installed and started
properly:
1 From the Windows control panel, open the Administrative Tools folder. (For
Windows XP, when you use the classification view of the Control Panel window,
select Administrative Tools from Performance and Maintenance.)
Figure 547 Administrative Tools folder
2 Double-click the Services icon to enter the Services window.
546, the router acts as the RSH client. The remote host runs
Internet
Window2000 host
192 . 168 . 1 . 10 / 24