Configuring Voip Entity; Configuration Task List; Configuration Prerequisites; Creating Voip Entity - 3Com MSR 50 Series Configuration Manual

Configuring VoIP
Entity

Configuration Task List

Configuration
Prerequisites

Creating VoIP Entity

Configuring Basic
Functions
Complete the following tasks to configure a VoIP entity:
Task
"Creating VoIP Entity" on page 2271
"Configuring Basic Functions" on page 2251
"Configuring DTMF Transmission" on page 2269
"Configuring Fast Connection and Tunneling" on page 2272
"Configuring DTMF Transmission in Fast Connection Mode" on
page 2274
"Configuring Out-of-Band DTMF Transmission with Tunneling
Enabled" on page 2274
"Configuring VAD" on page 2274
"Configuring Options Related to Dial Plan" on page 2261
Log in to the router equipped with a voice card (for example, an FXS interface
card) and enter user view.
Follow these steps to create a VoIP entity:
To do...
Enter system view
Enter voice view
Enter voice dial program view dial-program
Create a VoIP entity and enter
its view
Configure a number template
on the terminating router
Configure a policy for routing
from the VoIP entity to the
terminating VoIP gateway
Configure an area ID
Configure the DSCP subfield
of the ToS field in IP packets
of the RTP stream carried by
the VoIP entity
Follow these steps to configure the basic functions of the VoIP entity:
To do...
Enter system view
Enter voice view
Use the command...
system-view
voice-setup
entity entity-number voip
match-template
match-string
address { ip ipaddress | ras |
sip { ip ip-address [ port
port-number ] | proxy } }
area-id string
dscp media dscp-value
Use the command...
system-view
voice-setup

Configuring VoIP Entity

2271
Remarks
Required
Required
Optional
Optional
Optional
Optional
Optional
Optional
Remarks
-
-
-
-
Required
By default, no called number
template is configured for the
voice entity.
Required
By default, no policy is
configured.
Optional
By default, no area ID is
configured.
Optional
EF (101110) by default.
Remarks
-
-