3Com MSR 50 Series Configuration Manual page 2336

2336 C 134: E1 T1 C
HAPTER AND ONFIGURATION
Configuration procedure
1 Configure Router A in City A
# Configure the IP address 1.1.1.1/24 for the interface Ethernet 2/0.
<RouterA> system-view
[RouterA] interface ethernet 2/0
[RouterA-Ethernet0/0] ip address 1.1.1.1 255.255.255.0
[RouterA-Ethernet0/0] quit
# Create a TS set on the interface Ethernet 1/1.
<RouterA> system-view
[RouterA] controller e1 1/1
[RouterA-E1 1/1] timeslot-set 1 timeslot-list 1-31 signal r2
[RouterA-E1 1/1] quit
# Create a POTS voice entity corresponding to telephone number 010-1003 for
the FXS interface.
[RouterA] system-view
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] entity 1003 pots
# Configure a target match-template for the POTS voice entity.
[RouterA-voice-dial-entity1003] match-template 0101003
# Associate the POTS voice entity with FXS subscriber line 3/0.
[RouterA-voice-dial-entity1003] line 3/0
[RouterA-voice-dial-entity1003] quit
# Create a POTS voice entity for the E1 interface.
[RouterA-voice-dial] entity 1001 pots
# Configure a target match-template pointing to telephone number 010-1001 for
the POTS voice entity.
[RouterA-voice-dial-entity1001] match-template 0101001
# Associate the POTS voice entity with subscriber line 1/1:1.
[RouterA-voice-dial-entity1001] line 1/1:1
[RouterA-voice-dial-entity1001] send-number all
[RouterA-voice-dial-entity1001] quit
# Create a POTS voice entity corresponding to telephone number 010-1002 for
the E1 interface.
[RouterA-voice-dial] entity 1002 pots
# Configure a target match-template for the POTS voice entity.
[RouterA-voice-dial-entity1002] match-template 0101002