3Com MSR 50 Series Configuration Manual page 2337

E1/T1 Voice Configuration Example 2337
# Associate the POTS voice entity with subscriber line 1/1:1.
[RouterA-voice-dial-entity1002] line 1/1:1
[RouterA-voice-dial-entity1002] send-number all
# Create a VoIP voice entity.
[RouterA-voice-dial-entity1002] entity 0755 voip
# Configure a target match-template for the VoIP voice entity.
[RouterA-voice-dial-entity755] match-template 0755....
# Configure the target address of the VoIP voice entity.
[RouterA-voice-dial-entity755] address ip 2.2.2.2
2 Configure Router B in City B
# Configure the IP address 2.2.2.2/24 for the interface Ethernet 2/0.
<RouterB> system-view
[RouterB] interface ethernet 2/0
[RouterB-Ethernet0/0] ip address 2.2.2.2 255.255.255.0
[RouterB-Ethernet0/0] quit
# Create a TS set on interface E1 1/1.
[RouterB] system-view
[RouterB] controller e1 1/1
[RouterB-E1 1/1] timeslot-set 1 timeslot-list 1-31 signal e&m-delay
[RouterB-E1 1/1] quit
# Create a POTS voice entity corresponding to telephone number 0755-2001 for
the E1 interface.
[RouterB] voice-setup
[RouterB-voice] dial-program
[RouterB-voice-dial] entity 2001 pots
# Configure a target match-template for the POTS voice entity.
[RouterB-voice-dial-entity2001] match-template 07552001
# Associate the POTS voice entity with FXS subscriber line 1/1:1.
[RouterB-voice-dial-entity2001] line 1/1:1
[RouterB-voice-dial-entity2001] send-number all
[RouterB-voice-dial-entity2001] quit
# Create a POTS voice entity corresponding to telephone number 0755-2002 for
the E1 interface.
[RouterB-voice-dial] entity 2002 pots
# Configure a target match-template for the POTS voice entity.
[RouterB-voice-dial-entity2002] match-template 07552002