Displaying And Maintaining Foip Configuration; Foip Configuration Example - 3Com MSR 50 Series Configuration Manual

2352 C 135: F
HAPTER AX OVER
Displaying and
Maintaining FoIP
Configuration
FoIP Configuration
Example
IP C
ONFIGURATION
To do...
Configure the threshold of
local training globally
Configure the ECM mode
globally
Operation
Display the statistics of the
FoIP module
Clear the statistics of the FoIP
module
Network requirements
The headquarters of a company in City B and its branch in City A transmit and
receive faxes over an IP network.
Router A in City A and Router B in City B use the same type of network
connection. Specifically, both routers are connected to fax terminals via an FXS
voice subscriber-line, and to a host through Modem via another FXS voice
subscriber-line. In addition, the hosts at both ends are installed with the fax
software.
At the branch in City A, the number "0101001" is attached to the FXS voice
subscriber-line connected to the fax machine, and "0101002" to the
subscriber-line connected to the Modem. At the headquarters in City B, the
number "07552001" is attached to the FXS voice subscriber-line connected to the
fax machine, and "07552002" to the subscriber-line connected to the Modem.
The IP addresses 1.1.1.1/24 and 2.2.2.2/24 are respectively assigned to the
interfaces through which the routers in City A and City B access the Internet.
Use the command...
default entity fax
local-train threshold
threshold
default entity fax ecm
Command
display voice fax statistics
reset voice fax statistics
Remarks
Optional
By default, the threshold is
10.
The configured threshold
takes effect only after you
carry out the default entity
fax train-mode local
command.
Optional
By default, the fax does not
use ECM.
Remarks
Available in any view
Available in user view