Displaying and
Maintaining ACFP
ACFP Configuration
Example
Network Requirements
To do...
Display the configuration
information of the ACFP
server
Display the configuration
information of an ACFP client
Display the configuration
information of an ACFP policy
Display ACFP rule
configuration information
Display ACFP rule cache
configuration information
Display the configuration
information of ACFP trap
Clear ACFP rule cache
Different departments are interconnected on the intranet through the Device
■
(ACFP server).
The ACFP client is connected to the Device to control the traffic on the Device
■
(ACFP server) and analyze the traffic received through Ethernet 1/2. After
analysis, the ACFP client permits the packets received through Ethernet 1/2
with a source IP address of 192.168.1.1/24 to pass and denies the packets
received through Ethernet1/2 with a source IP address of 192.168.1.2/24.
Displaying and Maintaining ACFP
Use the command...
display acfp server-info
display acfp client-info [ client-id ]
display acfp policy-info [ client
client-id [ policy-index ] |
dest-interface interface-type
interface-number | in-interface
interface-type interface-number |
out-interface interface-type
interface-number ] [ active | inactive ]
display acfp rule-info { in-interface
[ interface-type interface-number ] |
out-interface [ interface-type
interface-number ] | policy [ client-id
policy-index ] }
display acfp rule-cache [ in-interface
interface-type interface-number |
out-interface interface-type
interface-number ] *
display snmp-agent trap-list
reset acfp rule-cache [ in-interface
interface-type interface-number |
out-interface interface-type
interface-number ] *
2195
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view
Need help?
Do you have a question about the MSR 50 Series and is the answer not in the manual?